Description For use on most external pretreated timbers; (refer to tin/container). Contains film biocide preserver to prevent a surface growth of mould /algae. Suitable for rough, sawn or smooth timber, but not suitable for garden furniture unless over sealed. Harmless to plants and pets when dry. Oil/solvent based for deeper penetration. Low odour ready to use formulation. Superb quality water repellent resins. UV fade resistant colour pigments. High level, long lasting protection. For unpreserved/untreated timber we recommend using Barrettine Universal Preserver first as a primer. Application This product cannot be sprayed with a traditional pump action garden sprayer. Ensure wood to be treated is dry, free from dirt and repellent coatings such as paint or varnish. (remove and sand down as required). Recommend using a biocidal wash such as Barrettine Knockout Mould and Mildew prior to treatment. The final colour finish can vary considerably due to the age, type & condition of the timber being treated. We always recommend carrying out a test area first in an inconspicuous area to make sure you are happy with the final dried colour. Brush, dip, roller or spray in suitable conditions. (When used outdoors make sure weather conditions are dry and still). Coverage: 180ml per m2 or 1 litre to 5-6 sq metres. Drying times: 12 hours under normal conditions (20°C/65% rel. humidity). Best results – recommend 2-3 applications/coats. Clean equipment with Barrettine White Spirit. Always read the label. Use biocides safely.
