Description Protects against fungal decay such as wet rot, wood discolouring fungus and wood boring insect attack. Penetrates strongly into end grain wood providing a water repellent finish. Contains resins and oils to give a long-lasting effect. After application, clean tools immediately after use with Barrettine White Spirit or Brush Cleaner. Application Drying time: 12hrs Application: Brush Coverage: 180ml/m2 Active ingredients: Tebuconazole, IPBC and Permethrin. Apply the product liberally to the end grain and allow it to be absorbed. The ends of the timber can also be stood in Cut End Preserver for an hour to allow the product to deeply penetrate. Shake Well. Apply using a synthetic brush designed for oil based products, spreading out thinly and evenly, ensure end grain is thoroughly treated along with cut and drilled areas. Reseal container after use. It is recommended that a minimum of 2 coats are applied depending on wood species and surface characteristics. Allow 6–12 hours drying time (touch dry) between coats. Application of successive coats will provide a darker finish and on smooth wood a higher sheen finish. If using the Clear Preserver in conjunction with a stain / wood dye it is recommended to apply the colourant before the Preserver, test effect on an off-cut initially. Before use, test a small inconspicuous area with all products to be used, to ensure a satisfactory final finish and compatibility. Do not use if ambient temperature is below 5°C or humidity is above 80%. Clean tools immediately after use with Barrettine White Spirit or Brush Cleaner.
