Description An exterior, solvent-based low build wood stain Flexible coating prevents peeling and cracking Helps prevention of surface mould and algae Offers a translucent, semi-gloss finish Resistant to UV light High VOC Up to 12m2 coverage per litre Application Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer’s instructions on the tin at all times. Application temperature should not be below 5°C or exceed 30°C and a relative humidity of 85%. Ensure tin is stirred thoroughly before and during application. This product is not suitable for spraying. As a standalone product, usually for rough sawn timber such as cladding, fascias and soffits, apply 3 coats. For joinery, such as doors and windows, apply as below: – Apply 1 coat with a good quality, long haired, natural bristle brush in a full flowing coat, laying off in the direction of the grain, using the minimum number of brush strokes necessary Leave to dry for 24 hours For best results, keep the interval between coats as small as possible, not exceeding 1 month but allowing each coat to dry thoroughly
