“ICreation” – Fast Epoxy Resin, 6h Demoulding, Transparent Gloss Finish

If you are working with resin for the first time, we recommend reading our articles first:–How to use epoxy resin: tricks and general guide–How to calculate the quantity of a and b in epoxy resinsEpoxy resin is mixed according to the proportions unique for each type, specified in the technical specifications. Each component is measured strictly by weight in grams (in the case of using weight proportions), both components are poured into one container (clean and dry) and mixed for 5-7 minutes (alternating stirring clockwise and counterclockwise, whilst ensuring that the mixture is scraped from the walls and bottom of the container). After mixing, it is recommended to pour the mixture into another clean and dry container and leave for 5-7 minutes. After that, the resin can be poured into a silicone mould, into a homemade formwork.Work with epoxy resin in a well-ventilated/ ventilated room with (important!) low humidity at a temperature not lower than 20 and not higher than 25-27 °C. Moisture should not be in the moulds / blanks, otherwise cloudy stains and other defects may appear on the surface of the product after curing. It is not recommended to work with resin during and after rain, near reservoirs, when foggy. When working with the product, use personal protective equipment: a respirator mask, gloves, and safety glasses.Do not leave a large amount (more than 100 g at t 25 °C) of mixed resin in one container for more than 10 minutes. To avoid overheating of the resin caused by the “mass” effect, pour the mixture into other, smaller containers.Add no more than 5% of dyes, pigments and other additives to the finished mixture. In no case should you add water-based dyes to the epoxy resin.Keep track of the operating time: the “life” time of the resin is indicated in the technical specifications of the product. After this time, the mixture will begin to thicken and heat up.Do not use this resin for large fillings, it is only used to create jewellery. Do not mix a large amount (more than 100-150 grams) of the product at a time.WARNINGS: During processing, use protective masks, gloves, and other protective clothing. In case of contact with eyes, immediately rinse with cold water for 15 minutes and immediately consult a doctor.